Each team has its own professional sound system with enough sound power to reach 1000+ in attendance.
In most cases we travel with a truck and trailer. The minimum height to cross is 11 ft. & width is 9 ft. It's important that these access requirements be met for outdoor setups.
If the surface is either swept or cleaned with a blower, it will really improve the riders ability to perform.
School Assembly Show Setup
Size requirements: the preferable show area size is 40′X 100′. However, the picture above is a pre-show set up size for 500 to 600 students. Some schools have students seated on the ground while others allow them to bring their chairs. If you are doing show indoors, the general rule has been to seat the students around the area as illustrated above starting from the outside first and working inward. Whatever space that is left is ours to work with. Sometimes the area is tight, but we are capable of making it work.
School Assembly Show Setup: the general flatland & ramp show set-up time is approx. 15 minutes or less. To reduce setup time, be sure that any access gates are unlocked and ready for the team. Most teams do carry their own power generator. However, a back up power source is recommended.
Show preformance area options
This is the setup we strive for – size: 40' by 100' feet. We are able to use all of our equipment and perform our full show complete with both box & quarter pipe.
Schools do not usually have our half pipe show, but it is an option. The area required is 30' By 40' feet.
With a smaller version of our ramp, we can perform in lunch rooms or gyms. We have no specific size requirement in this case and try to be creative with what space is available.
We will hit the stage! We can modify our show to a stage situation. Please have all stage props cleared.